Turn Waste to Energy

Power Generation & Cogeneration Professional Manufacturer
Turn Waste into Energy, environmential friendly, economical

10kw-2000kw

Waste to Energy Application

With Natural gas, biogas, and other gas from various industries worldwide, our range of PowerLink gas powered generator sets provides you with a continuous, economical, reliable, and sustainable source of power. Utilising natural gas, biogas, or other gases, PowerLink generator sets feature cutting-edge technology that can provide power, heat and cold according to our customer’s needs. All our gas gensets combine the highest performance with the lowest emissions in the 10kw – 2000kw electrical power range.

PowerLink gas cogeneration biogas

 

Eco-friendly Low emissions

up to 50% less CO2 produced than by conventional power plants.

 

 

Independent Supply guarantee

if local grids fail or are unreliable.

 

 

Good Performance

Long and stable operation without shutdown

 

 

Low lifecycle costs

from extended maintenance intervals and reduced oil consumption.

 

 

Reliable Proven technology

with thousands of successful installations worldwide.

Where does the gas come from？

Biogas gained from wastewater,manure,foodwaste…

waste to energy wastewater power solution
Anaerobic digestion of waste water to be converted into biogas.
waste to energy solution cow farm biogas
Cow Farms can use animal waste and convert it to biogas.
waste to energy solution pig farm
Pig Farms can use animal waste and convert it to biogas.
waste to energy landfill site biogas generation
Through anaerobic digestions, waste from landfill sites can be converted into biogas.
waste to energy rubbish
Once broken down through anaerobic digestion, food waste can produce biogas which is used in our generators.

PowerLink York-GXE250-BG-4-scaled-waste to gas solution

Waste to Energy

  •  

    Turn waste to energy

Keypoints :

  • LPG gas from landfill site
  • 200kw gas genset to produce electricity to power the onsite equipments
  • Run as prime power 24/7 continuous running
  • Resilient and low-maintenance cost
  • This site used open type, soundproof, containerized type available

Waste to Energy Application

Biogas to power solution

READ MORE
Biogas to power solution
1.8MW BIOGAS CHP SYSTEM ENGINEERING PROJECT

1.8MW BIOGAS CHP SYSTEM ENGINEERING PROJECT

  • Location: China
  • Equipment: 3*CG600-BG Gas Genset
  • Electric output mode: Low voltage to grid
  • Field / fuel: Waste Centre / Waste Landfill Biogas
  • Total output power: 1.8MW
400KW NATURAL GAS POWER GENERATION PROJECT

400KW NATURAL GAS POWER GENERATION PROJECT

  • Location: Europe
  • Equipment: CG400-NG Natural Gas Genset
  • Electric output mode: Low voltage to grid
  • Field / fuel: Boiler House for residentials
  • Total output power: 400KWe/460kWt
250KW BIOGAS POWER GENERATION PROJECT

250KW BIOGAS POWER GENERATION PROJECT

  • Location: United Kingdom
  • Equipment: GXE250-BG
  • Electric output mode: Low voltage to grid
  • Field / fuel: Landfill Site / Biogas
  • Total output power: 250KWe
250KW NATURAL GAS COGENERATION HOTEL PROJECT

250KW NATURAL GAS COGENERATION HOTEL PROJECT

  • Location: Europe
  • Equipment: CG250S-NG Natural Gas Genset Soundproof
  • Electric output mode: Low voltage to grid
  • Field / fuel: Hotel
  • Total output power: 250KWe/330KWt
2MW BIOGAS POWER GENERATION PROJECT

2MW BIOGAS POWER GENERATION PROJECT

  • Location: China
  • Equipment: 2x CG1000S-BG Gas Generator Container
  • Electric output mode: Low voltage to grid
  • Field / fuel: Livestock Manure / Biogas
  • Total output power: 2MWel
75KW BIOGAS POWER GENERATION PROJECT

75KW BIOGAS POWER GENERATION PROJECT

  • Location: Brazil
  • Equipment: 1xGXC75C-BG Biogas Genset
  • Electric output mode: Low voltage to grid
  • Field / fuel: Agricultural And Animal Husbandry / Biogas
  • Total output power: 75KW
Biogas-Cogeneration-Project-photo-CHP-units-

>> Project Engineering

We are able to engineer a full gas project for our customers, covering the designing, fabrication and delivery of the units, as well as creating a service plan for the generator.

TGE800-NG-800kw gas genset service and support

>> After Sales Service

At PowerLink, we provide all our customers with a comprehensive aftersales service worldwide, allowing customers to have peace of mind when using our generators.

Parts-support-Accessories-PowerLink-Service

>> Accessories Support

PowerLink has parts warehouses in Europe, Asia, America, and Oceania, with a sufficient level of stock at each warehouse to provide customers with original parts when needed.

Service Applications

The provision of high-quality associated services for Powerlink gas generator is the main factor driving the long-term cooperation between PowerLink and our customers. PowerLink offers its customers a full package of services associated with repair and technical support of its own and third-party equipment.

COMMISSIONING

High-quality and competent equipment installation, start-up and run-in is a ticket to its continuous failure-free operation. The commissioning package enables the customer to obtain a facility fully prepared for operation.

PILOT OPERATION

PowerLink carries out pilot operation of its new solutions at customer enterprises as part of joint projects.

REGULAR EQUIPMENT MAINTENANCE

Periodic equipment inspection and diagnostics as well as technical consultations with the customer, help prevent any problems or interruptions of power with our generators. PowerLink specialists can perform maintenance and repair at a time convenient for the customer regarding problems with their gas generators, or affiliate equipment.

EQUIPMENT OVERHAUL AND REPAIR

At PowerLink, our available production potential allows our team to perform repairs of any complexity within the customer’s agreed timelines on their purchased generator. OEM parts, consumable materials, and their analogs are delivered from our central warehouse in Shanghai, China, but PowerLink offers spare parts and consumable materials for all products to customers all over the world.

UPGRADING

PowerLink upgrades the previously supplied own- and third-party equipment at a customer’s site upon request. The aim of such upgrading is normally to aid in increasing the capacity of the existing system and improvement of the equipment control, which in turn simplifies the plant operator’s duties and signal transmission to the upper-level automatic control system.

PERSONNEL TRAINING

Upon request, the customer may have its personnel properly trained by our team to ensure further adequate operation of the equipment supplied by PowerLink. This training programme can take place at both the customer’s site and in the PowerLink training centre.

CONTACT US TODAY

Have any questions about our products, becoming a partner or how we can help with your gas projects?

Speak with our team today by pressing the link below.
LET`S TALK